Caractéristiques techniques

WiFi controller with optional PLMN connectivity. Full Type Approved and compliant with Radio Equipment Directive and with Part 15 of the FCC Rules.
Complete and detailed specifications available on EXTENDED GUIDE.


 

  • • DIN EN-50022 rail 4 modules
  • • Polycarbonate self-extinguish UL94-V0
  • • Weight: < 200 g
  • • Operating temperature: -20 … 60 °C
  • • Relative humidity: 5 … 95% non condensing
  • • Degree of protection IP40
  • • Altitude < 2000 m
  • • Equipment Class II – DOUBLE INSULATION
  • • Optional Li-Poly backup battery

WiFi

  • • Protocols: 802 b/g/n
  • • Frequency: 2,4 ∼ 2,5 GHz
  • • Output power: 20 dBm
  • • Antenna gain: 1 dBi EMBEDDED
  • • Security: WPA / WPA2
  • • Range indoor: 30 m TYPICAL
  • • Range outdoor: 100 m TYPICAL

POWER SUPPLY – VERSION L –

  • • AC Voltage: 9 … 27 V
  • • DC Voltage: 9 … 35 V polarity independent
  • • Current: < 690 mA MAX

AUX POWER SUPPLY

  • • RJ45 modular connector
  • • Voltage: 5 VDC
  • • Current: 50 … 300 mA TYPICAL

6 DIGITAL INPUTS

  • • Input voltage: 3 … 9 VDC
  • • Input current: 2mA @ 5V
  • • Activation time: 1 … 35535 sec
  • • Pulse counter width: > 20 ms
  • • Pulse counter frequency: < 25 Hz
  • • Running counter: up to 999999 min

4 Relay outputs

  • • SPST contacts
  • • Rated current 3 A
  • • Rated voltage 250 Vac
  • • Breaking capacity 750 VAMAX

Bluetooth

  • • Protocols: v4.2 BR/EDR and BLE
  • • Frequency: 2,4 ∼ 2,5 GHz
  • • Output power: 0 dBmTYPICAL
  • • Output power range: -12 … +12 dBm
  • • Antenna gain: 1 dBi EMBEDDED
  • • Range indoor: 10 m TYPICAL
  • • Range outdoor: 25 m TYPICAL

POWER SUPPLY – VERSION M –

  • • AC Voltage: 85 … 264 V – 47 … 63 Hz
  • • DC Voltage: 120 … 370 V polarity independent
  • • Current: < 100 mA @ 230VAC

Data interface

  • • RS-232 (RJ45 modular connector)
  • • 115200 bit/s
  • • 8 data bit, 1 stop bit, no parity

4 Analog INPUTS

  • • Input: 0 … 10V | 0 … 20mA | NTC
  • • Resolution: 0,014V | 0,028mA | 0,1°C
  • • Impedance: 25kΩ | 100Ω
  • • Accuracy: ±2%
  • • Full scale value: ±1000000
  • • Adjustable zero reading

Infrared

  • • Receiver angle: ±45°
  • • Receiver distance: > 15 m
  • • Transmitter angle: ±20°
  • • Transmitter distance: > 2 m

Pour accéder aux réseaux de téléphonie mobile, l’unité doit être équipée d’une carte PLMN (Modem avec carte SIM) 2G ou 4G, toutes deux permettant la sélection automatique de la bande.

OPTION PLMN 2 G (standard)

  • • Bands: B2/B3/B5/B8 (1900/1800/850/900)
  • • SIM card: microSIM 3FF – 3V / 1,8V
  • • Output power: Class 4 (2W) for 850/900
  • • Output power: Class 2 (1W) for 1800/1850
  • • Data GPRS uplink: 85,6 Kbps
  • • Data GPRS downlink: 85,6 Kbps

OPTION PLMN 4 G (sur demande)

  • • LTE Bands: B3/B7/B20 (1800/2600/800)
  • • UMTS Bands: B1/B8 (2100/900)
  • • GSM Bands: B3/B8 (900/1800)
  • • SIM card: microSIM 3FF – 3V / 1,8V
  • • Output power: Class 4 (2W) for EGSM900
  • • Output power: Class 2 (1W) for DCS1800
  • • Output power: Class 3 (250mW) for WCDMA
  • • Output power: Class 3 (200mW) for LTE
  • • Data LTE uplink: up to 8,96 Mbps
  • • Data LTE downlink: up to 10 Mbps
  • • Data UMTS uplink: up to 42 Mbps
  • • Data UMTS downlink: 5,76 Mbps
  • • Data EDGE uplink: up to 236,8 Kbps
  • • Data EDGE downlink: 296 Kbps
  • • Data GPRS uplink: up to 85,6 Kbps
  • • Data GPRS downlink: 107 Kbps